Bevel gear changing oil
Bevel gear changing oil
Bevel gear changing oil
Bevel gear changing oil
Bevel gear changing oil
Bevel gear changing oil
After the first 50 hrs. thereafter
every 200 hours or once a year.
Remove the oil plug.
• Let the oil flow into a suitable
container.
• Allow the last of the oil to drip
out of the transmission for
approx.10 - 15 minutes.
• Fit the oil plug.
• Oil amount when changing oil:
• Remove the dipstick.
• Pour the oil through the hole
where the dipstick is fitted.
• Follow the instructions on the
machine.
• Check that the oil level is up
to the “max” indication on the
dipstick.
• Repeat the procedure until the
correct oil level is reached.
• Fit the dipstick and fasten it
For gearboxes always use
SAE GL5 EPX 80W-90
.
• Decal with all information's
what you can find on the
machine.
4.9 Oil change gearboxes
79
To Next Page
Loading...
