Maintenance
115
Tarpaulin
Any damaged tarpaulins and other guards are replaced as follows:
Remove the machine's guard.
Replace the damaged parts.
Fit the machine's guard.
Check that the machine's guards are fitted correctly.
Wheel
»Maintenance intervals« Page 72
If tyres are worn or punctured, then the machine's wheel will need to
be changed.
The wheel is changed as follows:
Place a jack on the machine's wheel as shown.
• Minimum jack lifting capacity: 2000 kg.
Lift the wheel clear of the ground.
Remove all the bolts from the wheel.
Change the wheel.
Fit all bolts to the wheel and tighten to the given torque.
Check the tyre pressure and, if necessary, inflate to the correct
pressure.
»Specifications« Page 34
Bolts
Check tyre pressure
300 Nm
To Next Page
