Cleaning
64
Cleaning
Before cleaning
Higher risk when cleaning the equipment
When cleaning, there is an increased risk of injury. Paying
attention when carrying out cleaning work will ensure your safety
and that of others. Failure to follow the safety instructions may
cause serious injuries.
Therefore, do the following before cleaning:
• Disconnect the tractor's PTO outlet.
• Neutralise all hydraulics.
• Stop the tractor.
• Remove the ignition key.
• Apply the handbrake.
Failure to secure the tractor to prevent it from rolling could
endanger lives.
Disconnect the power when cleaning the machine
Always disconnect the power before you start cleaning the
machine. This will prevent short circuits and damage to the electric
circuit. There is a risk of burns and other serious injuries if the
electrical systems short circuit.
Protect your body and face when cleaning the machine
Wear the correct protective gear for body and face when cleaning
the machine. This will protect your body and face from dirt and oil
splashes. Severe skin and eye injuries can be caused if body and
face are insufficiently protected.
Before starting to clean the machine do the following:
• Open the guard around the cutting unit.
• Remove all loose material from the machine.
To Next Page
Loading...
