Connecting
46
Connecting
Attachment of the
tractor
Coupling a tractor and a machine
There is an increased risk of injury when attaching the machine to
the tractor. Attention to the task will ensure your safety and that of
others. Failure to follow the safety instructions may result in
serious injuries.
Therefore, when connecting the machine and the tractor you
should:
• Make sure that the tractor cannot roll.
• Make sure that the tractor and the machine belong to the same
category.
• Never stand between the tractor and the machine during
attachment.
• Use the hydraulic three point suspension slowly and carefully.
Attachment of the machine
There is an increased risk of injury when coupling the machine to
the tractor. Attention to the task will ensure your safety and that of
others. Failure to follow the safety instructions may result in
serious injuries.
When carrying out an attachment you must make sure that:
• The machine is placed on an even surface.
• The machine is secured with a sturdy support.
Secure the attachment with the locking pin
The attachment must be secured to the machine with the locking
pin. The locking pin secures the machine against becoming
detached from the tractor. Attachment without the locking pin can
result in the machine becoming detached, leading to serious or
fatal injury.
Therefore, when connecting the machine you should be sure that:
• The machine cannot become detached from the tractor.
• The coupling is secured with the locking pin.
To Next Page
Loading...
