Operation
59
Working in the field
The operation is carried out as follows:
Check that all guards on the machine are folded out and correctly
positioned.
Check the surrounding area before starting to use machine
Check the surrounding area before driving and using the machine.
This prevents persons and animals in the vicinity from being
harmed. If the surrounding area is not checked, it may result in
serious injuries to persons or animals.
Keep away from the machine
No unauthorised persons should be close to the machine during
operation. This will ensure that no dangerous situations can arise.
Persons close to the machine during operation are at risk of being
severely injured.
Do not remove the protective guards
Check that all protective guards are in place before use. This
ensures that the machine will offer the operator maximum
protection against moving objects and the machine's cutting
knives. If the safety guards are removed or not used, it may result
in serious injuries and accidents.
The side guard for the cutting unit must be correctly
positioned before start up
The side guard for the cutting unit must be folded out and correctly
positioned before the machine is started. This ensures that the
machine offers the operator maximum protection against moving
objects. Moving objects may cause serious injuries and accidents.
To Next Page
Loading...
