Safety
10
Lighting equipment
Connect the 12 V power supply plug to the tractor's 7-pin
connector.
The machine has lights and reflective equipment fitted as standard, to
ensure its safety on roads. The lights and reflective equipment must
be in good working order at all times. Lights and labels must not be
removed from the machine. Any illegible or missing labels must be
replaced. New labels can be ordered as spare parts from your dealer.
Checking the electric cable
Check the electric cable. The insulation of the electric leads must
not be unduly worn, and the cables must not be hanging loose.
Electric cables with cable insulation that is missing or worn
through must be replaced. Otherwise, this will damage the
machine.
Indicators (amber)
Rear lights/brake lights
To Next Page
