Maintenance
76
After 50 hours of use
After 50 hours of use, the machine oil should be changed:
Safety in connection with maintenance work on the machine
When working on the machine the tractor must be stopped and
secured. This prevents the PTO shaft from suddenly starting to
rotate. Failure to follow the safety instructions may result in
serious injuries.
When working on the machine:
• The tractor's PTO must be disconnected.
• The tool must be lowered to the ground.
• The tractor engine must be stopped.
• The ignition key must be removed.
• The hand brake must be activated.
• The tractor must be prevented from rolling.
Failure to secure the tractor to prevent it from rolling could
endanger lives.
Be careful when using oil
Use barrier cream or protective gloves when handling oil. It will
protect your hands against skin injuries. Direct contact with the oil
could lead to serious skin injuries
Use the correct oil type
Always use the correct oil type for the transmission. This will
ensure the transmission has a long service life. Using the incorrect
oil type may damage the transmission.
Maintain correct oil level
The maximum and minimum oil level indicators on the
transmission must not be exceeded. Correct transmission oil level
will ensure a long service life. Incorrect oil levels can cause the
transmission to overheat, resulting in serious damage.
Page
»Cutterbar« 89
»Swivel hitch« 92
»Main gear« 91
To Next Page
Loading...
