Operation
55
Operation
Safety
Before operating
The operator should receive careful instructions before using
the machine
The machine should only be used if the operator has been given
thorough instructions. Thorough machine instruction allows safe
usage. Insufficient instructions can result in wrong usage of the
machine and accidents.
Read the safety instructions before using the machine
Before using and loading the machine the operator should read
the safety instructions carefully.
»Safety« Page 6
Attention to the task will ensure your safety and that of others.
Failure to follow the instructions may result in serious injuries.
The side guard for the cutting unit must be correctly
positioned before start up
The side guard for the cutting unit must be folded out and correctly
positioned before the machine is started. This ensures that the
machine will give maximum protection to the operator. Moving
objects may cause serious injuries and accidents.
Do not remove the protective guards
Check that all protective guards are in place before use. This
ensures that the machine will offer maximum protection to the
operator. If the safety guards are removed or not used, it may
result in serious injuries and accidents.
The following instructions should be complied with:
• Check all points mentioned in the “maintenance” section.
»Specific safety information« Page 69
»Lubrication safety and use of oil« Page 70
• Check blades are not worn down. The knives can be turned so
as to gain the opposite rotational direction.
»Knives« Page 78
To Next Page
Loading...
