Preparation
36
Preparation
Preparing the machine
The machine is divided into its main components for transport to the
user. The machine must be assembled in accordance with the specific
assembly instructions delivered with each machine.
If parts are missing and/or are damaged during transport, please
inform the dealer, importer or manufacturer immediately.
Operator's Manual
The instruction manual belongs with the machine and must always be
kept on or by the machine.
Do not attempt to assemble the machine alone
Personnel must be trained before assembling the machine. Do not
carry out assembly work alone. The following must be observed to
ensure that the machine is in good working order:
• Adhere to the sequence of the work steps.
• Adhere to the tolerances and tightening torques of bolts,
screws and component parts of the machine.
• Knowledge of occupational safety when assembling the
machine.
Incorrect assembly can cause accidents or damage to the
machine.
Check list of component parts Quantity
PTO shaft 1
Operator's Manual 1
Spare parts manual 1
Additional parts See delivery note
To Next Page
Loading...
