Maintenance
73
PTO shaft check
Refer to the manufacturer's user manual delivered with the PTO shaft.
»User manual for the PTO shaft« Page 37
Safety in connection with maintenance work on the machine
When working on the machine the tractor must be stopped and
secured. This prevents the PTO shaft from suddenly starting to
rotate. Failure to follow the safety instructions may result in
serious injuries.
When working on the machine:
• The tractor's PTO must be disconnected.
• The tool must be lowered to the ground.
• The tractor engine must be stopped.
• The ignition key must be removed.
• The hand brake must be activated.
• The tractor must be prevented from rolling.
Failure to secure the tractor to prevent it from rolling could
endanger lives.
Always use original spare parts on the machine
Always use original spare parts. Original spare parts should be
used for safety reasons. The manufacturer takes on no warranty
responsibility in cases where non-original spare parts are used.
Make sure that all safety equipment is in place
Check that all safety equipment is in place. This ensures that the
machine will offer maximum protection to the operator. If the safety
equipment is removed or not used it may result in serious injuries
and accidents.
To Next Page
Loading...
