36
1.4.6 Record mode
User will choose recording mode channel by channel and selectable parameters and
meaning are below.
• Manual: Manual recording function that starts record and/or stop recording
manually by pushing REC key on remote controller or on front key.
• Continuous: Continuous recording mode that starts to recording automatically after
turning on the systems.
• Motion: Start to record under motion detection. Under Motion, it starts pre-
alarm recording around 2 or 3 second and maintains it until no of motion event. Post-
alarm recording will be controlled at Post alarm recording time on Event Setup Menu.
(Refer to paragraph 3.3.4)
• Sensor: Start to record under sensor input. As same as motion mode, it starts
pre alarm recording around 2 or 3 second and maintain it until no of sensor input.
Post-alarm recording will be controlled at Post alarm recording time on Event Setup
Menu. (Refer to paragraph 3.3.2)
• Motion + Sensor: Start to recording under motion detection or Sensor
occurrence. The detailed will be referred to previous motion detection & sensor
occurrence.
• Schedule: This mode supply user defined time and date schedule
recording in advance detailed recording schedule will be referred to paragraph 3.2.4
record schedule.
To Next Page
