Vicon VDR-208 - Software Upgrade; Backup

64
3.11.9. Software Upgrade
Users can upgrade the software of Ramdisk and Kernel using the USB flash drive
(thumb drive) by the following steps.
- Get the latest version of software (Ramdisk/Kernel) from distributor
- Copy the downloaded files from the PC to the USB memory.
- Connect the USB memory to the USB port.
- Go to 'System Setup' then 'S/W Upgrade' then select Ramdisk or Kernel to upgrade.
Figure 3-45 Software Upgrade
- After the unit recognizes the USB flash drive and upgrading end, the unit will reboot.
Figure 3-46 Ramdisk Upgrade
3.12. Backup
Backup recording data to HDD or USB Flash Drives