Vigilant MX1-Au - MX1 Controller Wiring

Document: LT0439 Vigilant MX1-Au Operator Manual
Issue 1.73 23 October 2018 Page 11-7
Figure 11-5 – Battery Wiring to MX1 Controller
The MX1 Controller provides most of the field wiring connections. Figure
11-6 shows the Controller and its various connection points.
Examples of wiring the external devices to these points are covered in
the following sections.
The factory-fitted wiring includes:
 The LCD/keyboard FRC plugs into J30.
 The PSU loom plugs into J14.
 The MCP/door switch plugs into J3.
 Battery leads terminated in J13.
MX1 Controller Wiring
Controller
Wiring
Connections
Factory Fitted
Wiring