Vigilant MX1-Au - Chapter 5 Recalling Zone and Point Status; Recalling Off-Normal Points and Zones

Document: LT0439 Vigilant MX1-Au Operator Manual
Issue 1.73 23 October 2018 Page 1-1
This chapter provides an overview of the VIGILANT MX1 system function
and describes the normal appearance of the operator interface.
It also describes the concept of Access Levels for access to commands,
and the conventions used in this manual to refer to parts of the display
when describing these commands.
Refer to the page number listed in this table for information on a specific
topic.
Topic
See Page
How to Use this Manual
1-2
System Operation
1-3
Basic System Function
1-4
Normal Appearance of Operator Interface
1-5
Operator Interface
1-6
Description of Operator Interface
1-6
Operator Commands
1-10
Operator Access Levels
1-11
Smoke Control/AS 1668 Fan Panel
1-12
Terminology Used in this Manual
1-12
Nuisance Alarms
1-17
Acknowledgements
1-19
Chapter 1
Introduction
Introduction
In this Chapter