Name: Vishay P3
Brand: Vishay
Rating: 4 (1 reviews)

To Next Page

To Previous Page

- 26 -

m/s2

Meters per second ^2

ton

Tons

°F

Degrees Fahrenheit

°C

Degrees Celsius

°K

Degrees Kelvin

All of the above units assume linear scaling. In order to prop-

erly scale the data, it is necessary to supply the full scale value

(in the selected engineering units) and the mV/V output at the

full scale value.

*GAGE FACTOR/SCALING*

Chan : 1

Units : psi

Full Scale : 1

F.S. mV/V : 2.000

Dec. Places : Auto

To change the full scale value, use the and keys to se-

lect the desired digit to modify. The digit is changed by using

the and keys. The default full scale value is 1.

The full scale value must be an integral value between +99999

and -99999. A full scale value of 0 is not permitted. The default

value is 1.

The F.S. mV/V value must be between +15.625 mV/V and -

15.625 mV/V. A value of 0 is not permitted. The default value

is 2.000.

Note that during manual calibration, the full scale value is fixed,

and the full scale mV/V output is changed. It is therefore rec-

Questions and Answers:

Need help?

Do you have a question about the Vishay P3 and is the answer not in the manual?

Vishay P3 Specifications

General