- 42 -
6 Software Operation
6.1 Overview
The Model P3 is supplied with an Application (P3.exe) which
provides the ability to set up and collect data from the model P3
via the USB Interface. The Software is designed to operate in a
similar manner as the Model P3.
To operate the software, connect the USB interface on the
model P3 to an open USB port on the PC using the supplied ca-
ble. Once physically connected, start the application from Win-
dows by navigating to the following menus:
Start->Programs->Vishay Micro-Measurements->Model
P3->Model P3 Software
Once the program loads, an image of the Model P3 will be dis-
played.
To Next Page
Loading...