- 27 -
ommended to set this value at or near the expected full scale
value when manually scaling the channel.
To change the number of decimal places being displayed, high-
light the "Dec. places" menu item and use the and keys
to change the value. The range of decimal places is 0-3.
4.5.5 Recording Menu
The recording menu selects the recording mode and the rate at
which data is recorded to the multimedia card (MMC). The re-
cording interval menu can be accessed directly from the main
menu by pressing the key.
There are three recording modes: Disabled, Auto, and Manual.
Use the and keys to highlight the desired menu item.
Toggle the selection by using the and keys.
4.5.5.1 Recording Disabled
In the disabled mode, recording will not occur.
* RECORDING *
Mode : Disabled
āā Toggle Menu=Exit
To Next Page
Loading...