3. Installation
10 D-307083 PowerMaster-360R Installer's Guide
5) Connect the AC/DC adapter cable to the panel.
6) Connect the IP LAN cable to the panel.
7) Optional: To connect an external GSM antenna,
complete the following steps:
a) Push out the removable insert for the external
antenna, see figure (a) for details.
b) Connect the external antenna to the RF
switching connector, see figure (b) for details.
8) Push out the appropriate knockout for the cables that
are connected to the panel.
9) To place the panel on the base, align the two tabs of
the base with the slots on the panel.
10) Close and hold the panel to the base.
11) Rotate the lock by 90 degrees clockwise to the
locked position.
To Next Page
Loading...
