Visonic PowerMaster-360R - Configuring GSM-GPRS (IP) - SMS Cellular Connection

4. Programming
36 D-307083 PowerMaster-360R Installer's Guide
Step 1
Step 2
Step 3
Step 4
Select COMMUNICATION
Select Communication
Sub-menu option
Select the Communication Parameter you wish to configure




See
4:PRIVATE
REPORT
SMS REPORT
EMAIL BY SERVER
4.6.4

REPORTED EVENTS
1st E-MAIL
See also
User's
Guide
Chap. 4
Section
B.12
1st SMS tel#
2nd E-MAIL
2nd SMS tel#
3rd E-MAIL
3rd SMS tel#
4th E-MAIL
4th SMS tel#
SMS Permission
SMS/MMS BY SRVR
1st SMS/MMS
2nd SMS/MMS
3rd SMS/MMS
4th SMS/MMS
5:MOTION CAMERA
VIEW ON DEMAND
4.6.5

VIEW TIME WINDOW
VIEW OTHER ALARM
UPLOAD FILM
KIDS COME HOME
6:UP/DOWNLOAD
UP/DWNLOAD PARAM
GPRS UP/DOWNLOAD
4.6.6

Remote access
Panel SIM Tel. #
Mast. UL/DL code
1st caller ID#
Inst. UL/DL code
2nd caller ID#
UL/DL Modes
7:BROADBAND
1
DHCP Client
RESET MODULE
4.6.7
Manual IP
PLNK curr.params
Curr.IP address
Curr.subnet mask
Current Gateway
Current path
8:WiFi
ACCESS-POINT
A.POINT MODE
START A.POINT
STOP A.POINT
4.6.8
4.6.2 Configuring GSM-GPRS (IP) - SMS cellular connection
The GSM/GPRS module is capable of communicating with the Monitoring station receiver by GPRS or SMS channels.
The GPRS channel is always enabled. If the GPRS module is not able to communicate successfully, the message is
sent by SMS.
04:COMMUNICATION
  
2:GSM/GPRS/SMS
  
MENU item
Enter 2:GSM/GPRS/SMS, select the menu you wish to configure see guidance above and in section 4.6.1, then refer
to the following table for an explanation and configuration instructions for each option.
Option
Configuration instructions
SMS REPORT
Define whether the system will report events to the Monitoring Stations' SMS receivers
via the SMS Channel. For further information, see section 4.6.3 options 26 & 27.
Options: disable (default); enable.
1
The name of the product is PowerLink3 IP Communicator