Visonic PowerMaster-360R - Correcting Trouble Conditions

4. Programming
D-307083 PowerMaster-360R Installer's Guide 15
No.
Function
Trouble condition (TRBL) (Orange) lights when the system detects an abnormal condition
caused by a fault, see Chapter 3 for details.
Service Server (Blue) lights when the system is connected to the security server.
Smart Home Service (Blue) lights when the system is connected to the smart home server.
WiFi (Green) indicates if the WiFi module is enabled or disabled. The light blinks fast when
activating or deactivating a WiFi access point and blinks slowly when the WiFi access
point is active.
Control keys
When you program the panel you can use the keypad's buttons for navigation and configuration. The following table
provides each key definition and its use:
Key
Definition
Navigation and use
Next
Move forward to the next menu option.
Back
Move backward to the previous menu option.
OK
Select a menu option or confirm a setting or action.
Fire alarm
Configure a fire alarm.
Volume Up
Increase volume.
Arm away
Arm building when empty.
Volume down
Decrease volume.
Arm home
Arm building when occupied.
Chime
Turn on or off chime.
OFF
Disarm system.
Event log
Review the event log.
Cancel entry delay
Cancel entry delay when system is armed to home or away.
Partition
Select a partition.
Emergency alarm
Configure an emergency alarm.
0 – 9
N/A
Enter numerical data, where applicable.
To review the options within the control panel menus and select an option, repeatedly press the Next or Back
until the desired option displays (also designated as  in this guide), then press the OK to select
the desired option (also designated as in this guide). To return to the previous options, repeatedly press the Home
. To exit the programming menu, press Away .
C
D
E
F