Visonic PowerMaster-360R - Control Panel; General Guidance - Control Panel Flow-Chart & Menu Options

4. Programming
D-307083 PowerMaster-360R Installer's Guide 27
4.5 Control panel
4.5.1 General guidance – Control panel flow-chart & menu options
The CONTROL PANEL menu enables you to configure and customize the operation of the control panel. The
CONTROL PANEL menu provides you with configurable parameters divided into several groups, each dealing with
certain aspects of the system operations as follows (see detailed list in Step 2 of the chart below):
Group
Description of Group Features and Parameters
Section
Arming/Disarming
and Exit/Entry
Procedures
Contains configurable features and parameters related to Arming and Disarming of
the system and the Exit and Entry procedures.
4.5.2
Zone Behavior
Contains configurable features and parameters related to the functionality of the
Zones.
4.5.3
Alarms &
Troubles
Contains configurable features and parameters related to initiating, canceling and
reporting of Alarm and Trouble events.
4.5.4
Sirens
Contains configurable features and parameters common to all sirens in the system.
4.5.5
User Interface
Contains configurable features and parameters related to the functionality of the
panel's audible and visual indications.
4.5.6
Jamming &
Supervision
Contains configurable features and parameters related to detecting and reporting of
RF Jamming and device Supervision (missing device) events.
4.5.7
Miscellaneous
Contains a variety of other configurable features and parameters related to the
system.
4.5.8
To enter the 03.CONTROL PANEL menu and to select and configure an option, proceed as follows:
Step 1
Step 2
Step 3
Select CONTROL PANEL
option
Select the Control Panel Parameter you wish to configure
Configure
option


See

See

See
INSTALLER MODE

4.5.2
4.5.4
4.5.6
03.CONTROL PANEL
01:ENTRY DELAY1
31:PANIC ALARM
51:PIEZO BEEPS
Go to the
indicated
group
section of
the
selected
option
02:ENTRY DELAY2
32:DURESS ALARM
52:TROUBLE BEEPS
03:EXIT DELAY
33:INACTIVE ALRT
53:MEMORY PROMPT
04:EXIT MODE
34:TAMPER ALARM
54:LOW-BAT ACK
05:QUICK ARM
35:AC FAIL REPRT
55: BACKLIGHT
06:BYPASS ARM
36:CONFIRM ALARM
56:SCREEN SAVER
07:LATCHKEY ARM
37:ABORT TIME
08:DISARM OPTION
38:CANCEL ALARM
09:ARMING KEY
39:ALARM RESET
40:ABORT FIRE T.
61:JAM DETECT
4.5.3
4.5.5
62:MISSING REPRT
4.5.7
21:SWINGER STOP
43:PANEL SIREN
63:NOT READY
When
done  to
Step 2
22:CROSS ZONING
44:SIREN TIME
64:MISS/JAM ALRM
45:STROBE TIME
65:SMOK FAST MIS
46:SIREN ONLINE
80: 3
rd
PARTY H.A
91:USER PERMIT
4.5.8
93:SOAK PERIOD
Arming &
Disarming
Alarms &
Troubles
User
Interface
Jamming and
Supervision
Zone
Behavior
Sirens
Miscellaneous