Vodavi STARPLUS STS - Retrieving Voice Messages; Voice Mail Transfer with ID Digits; Voice Mailbox Button

82 Voice Mail
Retrieving Voice Messages
To enter the Voice Mail system to check for mail:
Dial the Voice Mail group number or press the
preprogrammed VM GROUP flexible button,
-or-
Press flashing MESSAGE WAIT button
-or-
Use the Soft Key’s VM1 option (group 440 only).
(You will be prompted to enter your mailbox password.)
Voice Mail Transfer with ID Digits
While on a call and the caller on the other end wishes to leave a
Voice Message for another VM user:
1. At the initiating station, press TRANS.
2. Dial the Voice Mail Group number or press preprogrammed
VM GROUP flexible button.
3. Dial VMID (
mailbox location) of desired party and go on-hook.
Voice Mailbox Button
To program a Mailbox flexible button:
1. Press SPEED + SPEED, then press the desired flexible button
to be programmed.
2. Dial the Mailbox feature code (460-467 = VM locations 1-8).
3. Dial the VMID number.
 SINGLE LINE TELEPHONE
Not applicable