Vodavi STARPLUS STS User Manual

PBX/Centrex Codes on a Flex Button 67
When the desired message is shown on the LCD, press HOLD
to activate that message on your station. A confirmation
tone will sound; the DND button LED will flash.
 SINGLE LINE TELEPHONE
Not applicable
PBX/Centrex Codes on a Flex Button
For one-button access to Centrex or PBX features:
1. Program Centrex or PBX code into a Station or System Speed
Dial bin, including hook-flash (FLASH key), [
✳], and [#]
commands (refer to “Speed Dial” on page 74).
2. Program that speed bin onto a flexible button (refer to
“Flexible Button Programming” on page 44).
Release Button
The Release Button feature allows the station user to speed up call
handling time by disconnecting calls while being off-hook.
Using the handset, while off-hook (not the speakerphone):
Press the preprogrammed RELEASE button [641] to terminate
an intercom call, transfer sequence, page announcement, or
CO call.
Redial
Last Number Redial
To use Last Number Redial, either:
1. Press SPEED.

Vodavi STARPLUS STS Specifications

General

Brand	Vodavi
Model	STARPLUS STS
Category	Telephone System
Language	English