14 Attendant Features
2. Dial the System Speed bin location (9020-9099).
3. Dial telephone number, press SPEED, then hang up.
Speed Dial Options
To use the following speed dial options, enter as shown:
Attendant Unavailable
The Attendant Unavailable feature lets Attendant stations have a
button that places their station in an Unavailable Mode. When the
station is in the Unavailable Mode, the next Attendant station
receives dial “0” calls and recalls.
To activate Unavailable Mode:
As the (first programmed) Attendant …
Press the preprogrammed UNAVAILABLE flexible button,
-or-
Dial the Attendant Unavailable code [607] on the dial pad,
and the following results occur:
The flexible button LED lights solid, if programmed.
Recalls and dial “0” calls ring at 2nd Attendant’s station.
If the 2nd Attendant places their phone in unavailable,
the 3rd Attendant will receive recalls and dial “0” calls
,
and so forth through the sixth Attendant.
Initiate a Pulse-To-Tone
Switchover
Press TRANS during number entry.
Insert a Pause Press HOLD during number entry.
Insert a Flash into Speed Number Press FLASH.
Insert a Non-Display Character Press TRANS as first entry in speed bin.
This causes the numbers stored in the
bin not to display on the Digital
Telephones when the bin is accessed.
NOTE … Speed Bin numbers 9060-9099 are not monitored by Toll Restriction.
To Next Page
Loading...
