Calling Station Tone Mode Override 33
Calling Station Tone Mode Override
This feature enables a calling station to override a called station’s H
or P intercom settings.
When placing a call to a station and tone ringing is desired:
1. Dial [6#] on the dial pad.
2. Dial the extension number,
-or-
Press the DSS button of the desired station (a call tone rings
the station).
Camp On
A station may alert a busy party that an outside line is on hold and
waiting for them by using the CAMP ON button.
To camp on a call, press the TRANS button to transfer the call to the
desired busy station, then press the CAMP ON button.
The busy party will receive a muted ring over the keyset speaker,
and a visual flashing CAMP ON LED. By pressing the CAMP ON
button, the person called places their existing outside call on hold
and is connected to the person placing the Camp On. They can
then pick up the call on the appropriate line.
To alert a busy station of your call:
1. Press the CAMP ON button or use the Soft Key’s CAMP-ON
option. The called station will receive one burst of ringing.
OR