20 Call Forward
To activate Off-Net Call Forwarding:
1. Lift the handset, or press the ON/OFF button.
2. Press the FWD button, or dial [640].
3. Dial [
✳] on the dial pad, then enter the speed bin number
(9000-9019 or 9020-9099) that contains the number where
calls are to be forwarded. A confirmation tone will sound,
and the FWD button LED is flashing.
4. Replace the handset, or press the ON/OFF button.
To remove Off-Net Call Forwarding:
1. Lift the handset, or press the ON/OFF button.
2. Press the FWD button or dial either [640] or [662]. A
confirmation tone sounds and the FWD LED extinguishes.
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as the Digital
Telephone, except there is no FWD button. The user must
enter the 640 feature code to activate and 662 to clear.
Call Forward - Follow Me
The Follow Me feature allows a user who is away from their station,
to activate/deactivate call forwarding from another station in the
system. This lets the user forward their calls to their current location
or into Voice Mail, UCD, Hunt Groups, any other station in the
system, or to an off-net location. When this call forward is activated,
all calls presented to the forwarded station will immediately
forward to the destination station.
To activate Follow Me Call Forwarding:
1. Lift the handset, or press the ON/OFF button.
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial the station number where forwarding is desired.
4. Dial the appropriate forwarding condition code.
[6] = All Calls [8] = Busy [
✳] = Off-Net
[7] = No Answer [9] = Busy/No Answer
To Next Page
Loading...
