44 Flash
2. Replace the Executive station handset to terminate override.
Flash
When connected to an outside line:
Press FLASH to disconnect the outside line and reseize an
outside line dial tone.
Flash Key on Intercom
When connected to a page zone or another internal party:
Press FLASH to disconnect page or intercom call. An
intercom dial tone will sound.
Flexible Button Programming
To program a flexible button (to use feature codes):
1. Press SPEED + SPEED.
2. Press the button to be programmed (must be programmed
in database as a flexible button).
3. Dial the desired code. A confirmation tone will sound. (Refer
to the “Default Numbering Plan” on page 91, and the feature’s
description for any additional digits to enter).
4. Press the ON/OFF button.
To program a flexible button (to use speed bin dialing):
1. Press SPEED + SPEED.
2. Press the button to be programmed (must be programmed
in database as a flexible button).
3. Press SPEED.
4. Dial the speed bin number. A confirmation tone will sound.
5. Press the ON/OFF button.
To Next Page
Loading...
