Intercom 47
SINGLE LINE TELEPHONE
Not applicable
Intercom
Using an Intercom Button
To program a Flexible Button as an Intercom Button:
1. Press SPEED + SPEED.
2. Press the desired flexible button to program.
3. Dial [645] on the dial pad. A confirmation tone will sound. If
an error was made during entry, an error tone will sound.
When an intercom call rings a busy station (w/intercom btn):
» The CALLING station receives a ringback tone instead of a
busy signal. The “called” station hears a muted or reminder
ring and their intercom button LED flashes at the incoming
CO line rate. (This indicates an incoming intercom call.)
» The CALLED station can place the current CO call on hold by
pressing the HOLD button,
-or-
They can place the current intercom call on hold by pressing
the HOLD button. The intercom call is placed on hold on the
available intercom button.
» The CALLED station then presses the flashing intercom
button to answer incoming intercom call. When answered,
the following message displays on the called station LCD:
Sta XXX can be a programmed station name.
CALL FROM STA XXX
MMM DD YY HH:MM am
To Next Page
Loading...
