12 Attendant Features
Speed Dial Bin
The following procedure is used to associate names to a system
speed dial bin only.
To add names to a System Speed Bin:
1. Enter desired three-digit Directory List number (000-199),
-or-
Scroll through the Directory List using [
✳] to view the next
entry, and [#] to view the previous entry.
(If changing a name that is already associated with an
existing System Speed Dial Bin entry, skip to Step 4.)
2. Press TRANS.
3. Dial the system speed dial bin location (9020-9099).
4. Press MUTE.
5. Use the dial pad keys to enter the name (up to 24 characters).
The display updates as the name is entered.
6. Press SPEED when finished. A confirmation tone sounds and
the display updates.
7. Press HOLD, then use the [
✳] or [#] key to view other entries.
-or-
Hang up to end programming.
Attendant Disable Outgoing CO Line
The first Attendant can disable CO lines to prevent outgoing access
to those lines.
To disable a CO Line:
1. Lift the handset, or press the ON/OFF button.
2. Dial [602] on the dial pad. A confirmation tone will sound.
3. Press the line button of the CO Line to disable. The CO Line
button LED flashes; a confirmation tone sounds.
To reactivate the CO Line(s):
Repeat Steps 1-3 to disable this feature.
To Next Page
Loading...
Need help?
General
