24 Call Park
Call Park - System
An external call can be placed into one of eight parking locations,
and can be retrieved by any station that has a direct line
appearance or an available Loop button. Parked calls have their
own recall timer that recalls the originating station, and if still
unanswered, an Attendant.
To park a call:
1. Press TRANS, the caller will be put on hold.
2. Dial parking location (430-437). A confirmation tone will
sound.
3. If a busy tone is received, press TRANS + TRANS and dial
another park location, or press the CALL PARK flexible button
for a different parking location.
-or-
1. Press the CALL PARK flexible button. The caller will be parked
at the location programmed on the button.
2. If a busy tone is received, press TRANS + TRANS and dial
another park location, or press the CALL PARK flexible button
for a different parking location.
To retrieve a parked call:
1. Lift the handset or press the ON/OFF button, then press [#].
2. Dial parking location (430-437) where call was parked, or
press preprogrammed PARKED CALL PICKUP flexible button.
-or-
Use the Soft Key’s P-PKP 1 option when in an idle condition
(to pickup from park location 1 only).
To create a PARKED CALL PICKUP button:
1. Press SPEED + SPEED, then press the desired flexible button.
2. Dial [#] + the desired parking location (430-437).
To Next Page
Loading...
