Ring Down / Hot Line / Off-Hook Preference 69
When the timer expires, you will receive a signal via a CO line
queue indication on the RPT REDIAL flexible button. During
the Queue Call Back, the LCD display will indicate that this is
a Redial Call Back. Once the line queue is answered, the LCD
will indicate an outgoing CO line.
To activate a redial:
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset, the line will be seized and the number is
dialed. If you receive a busy/no answer, you may repeat the
step to activate another redial.
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A
confirmation tone will sound and Auto Redial is cancelled.
SINGLE LINE TELEPHONE
Not applicable
Ring Down / Hot Line / Off-Hook
Preference
If your phone has been programmed for Off-Hook Preference, you
can access an outside line, or a feature by going off-hook or
pressing the ON/OFF button. It simulates the depression of a
specific button and can be programed by a station user or a
database administration programmer using code [691] + the
button number.
To Next Page
Loading...
