80 Universal Day/Night Answer
To enter Unavailable Mode:
Dial [566] on the dial pad to block incoming UCD calls,
-or-
Press the preprogrammed AVAILABLE/UNAVAILABLE button.
UCD Overflow Station Forward
This feature allows UCD calls reaching the Overflow Station to call
forward to another station:
1. Lift the handset, or press the ON/OFF button.
2. Press the FWD button or dial [640].
3. Dial the desired code:
[6] = All Calls [8] = Busy
[7] = No Answer [9] = Busy/No Answer
4. Dial the 3- or 4-digit destination number where calls are to
be forwarded (Station, Voice Mail, UCD groups, Hunt group).
A confirmation tone will sound.
5. Replace the handset, or press the ON/OFF button.
To remove call forwarding:
1. Lift the handset, or press the ON/OFF button.
2. Press the FWD button. A confirmation tone will sound and
the FWD LED will extinguish.
Universal Day/Night Answer
Incoming CO lines can be programmed for Universal Day Answer
(UDA) or Universal Night Answer (UNA). UDA/UNA assigned CO
lines can also signal over the external page port(s). If External Day
programming is enabled and the system is in the day mode, the
assigned external page port(s) present a ringing signal. UDA/UNA is
established on a per CO line basis in admin programming.
To Next Page
Loading...
Need help?
General
