48 Intercom
SINGLE LINE TELEPHONE
Not applicable
Intercom Calls
To place an Intercom Call:
1. Press the pre-programmed DSS button of the party to be
called, or dial the extension number.
(You will hear ringing if the called station is in the T mode; or
three bursts of tone if called station is in H or P mode.)
2. Lift the handset, or use speakerphone after tone bursts stop.
3. Hang up to end the call.
To answer an Intercom Call:
In the T mode … you will hear repeated bursts of intercom tone
ringing and the HOLD button flashes slowly.
Lift the handset or press the ON/OFF button to answer,
-or-
Position the H-T-P switch to the H mode to reply.
In the P mode … you will hear three bursts of tone and one-way
announcement. calling party cannot hear other conversations.
Lift the handset or press the ON/OFF button to answer,
-or-
Position the H-T-P switch to the H mode to reply.
In the H mode … you will hear three bursts of tone and an
announcement.
Reply handsfree or lift the handset for privacy.
Dialing a number in the numbering plan
activates the telephone automatically.
To Next Page
Loading...
