Executive Override 43
To activate One-time Do Not Disturb:
Press the preprogrammed DND button while you are off-hook and
connected to a CO line or intercom call. The DND button LED will
light, and off-hook tones at your station are cancelled.
To cancel One-time Do Not Disturb:
Replace the handset. The DND button LED will extinguish
and DND will be cancelled.
SINGLE LINE TELEPHONE
To activate Do Not Disturb:
1. Lift the handset.
2. Dial [631], then replace the handset.
To remove Do Not Disturb:
1. Lift the handset.
2. Dial [631] or [662], then replace the handset.
Executive Override
Executive Override allows stations designated as “Executive” the
ability to override and “barge in” on other keysets engaged in CO
Line conversations. A change in volume may occur on the CO Line
or intercom call after the barge-in occurs.
If you call a busy station:
1. Press the preprogrammed EXECUTIVE OVERRIDE button
(625). The Executive station is bridged onto the CO line
conversation in progress at the called station. An optional
warning tone is presented to all parties prior to cut-thru.
Use of this feature when the executive override warning
tone is disabled may be a violation of Federal, State or
Local Laws, and an invasion of privacy. Check applicable
laws in your area before using this feature.
To Next Page
Loading...
