46 Headset Mode
Headset Mode
A modular headset may be used by connecting the headset to the
handset jack on the telephone (leaving the handset in place). The
ON/OFF button on the Digital Telephone is used to initiate and end
calls while using the headset.
To activate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button.
-or-
Use the Soft Key’s HEADSET option when in an idle condition.
The LED will light steady.
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button.
-or-
Use the Soft Key’s HEADSET option when in an idle condition.
The LED will extinguish.
While Headset mode is active, the ON/OFF button
activates the headset and disables speakerphone
and intercom call announce operation at your
station.
To install the headset, see the Installation Manual.
Station must be programmed in database
programming for headset operation before the
flexible button can be programmed.
To Next Page
Loading...
