18 Call Forward
RINGING Option = ringing, flashing Call Coverage LED, LCD
display as in following illustration:
NON-RINGING Option = flashing Call Coverage LED only (no
ringing or change to LCD)
2. Then press the flashing COVERAGE flexible button, or press
the ON/OFF button.
The call is answered and will cease to ring at any other
stations that may have the same coverage appearance. The
following message displays after the call is answered.
SINGLE LINE TELEPHONE
This feature can cover SLT extensions, however an SLT cannot
perform the call coverage function. The SLT extension need
not be physically installed, but the SLT card must be installed.
Call Forward
The Call Forward feature allows a station the ability to have calls
(internal or external) forwarded to a designated station, a UCD
group pilot number, Voice Mail group number, or Hunt group. This
feature must be enabled in admin programming.
To activate Call Forwarding:
1. Lift the handset, or press the ON/OFF button.
CALL FOR STA XXXX
MMM DD YY HH:MM am
CALL FOR STA XXXX
FROM STA YYYY HH:MM am
To Next Page
Loading...
