Last Number Redial 51
At an idle station:
1. Dial the Keyset Mode code [648] on the dial pad,
-or-
Press the preprogrammed KEYSET MODE button, the
following message displays:
2. Press [
✳] to scroll through the keyset modes.
3. Press [#] to scroll through the baud rates.
4. Press HOLD to save the desired entries.
SINGLE LINE TELEPHONE
Not applicable
Last Number Redial
The Last Number Redial (LNR) feature permits the automatic
redialing of the last telephone number dialed on an outside line. Up
to 24-digits can be stored. Outside line selection of the same line
used is automatic.
To use Last Number Redial, either:
1. Press SPEED.
2. Press [#].
-or-
Use the Soft Key’s LNR option when in an idle condition.
INACTIVE 2400
MODE=$ SAVE=HOLD BAUD=#
To Next Page
Loading...
