70 Ring Down / Hot Line / Off-Hook Preference
While Off-Hook Preference is enabled, you may access internal
intercom dial tone as follows:
1. Press the preprogrammed ICM button,
-or-
Dial your intercom number. (Do not lift the handset or press
the ON/OFF button before dialing intercom number.) The
LED will light steady and an intercom dial tone will sound.
2. Dial an internal station or feature access code.
Off-Hook Preference Programming (Via a Station)
If your phone is programmed for Off-Hook Preference and you
have the ability to enable or change the Prime Flexible Button:
Dial [691] on the dial pad, then dial the desired button
number. Refer to the following chart:
To disable Off-Hook Preference:
Dial [691] on the dial pad, then dial [00].
SINGLE LINE TELEPHONES
Single line telephones can bypass Off-hook Preference by
pressing the FLASH button and then dialing their extension
number.
❋
01
❋
02
❋
03
❋
04
❋
05
❋
06
❋
07
❋
08
❋
09
❋
10
❋
11
❋
12
❋
13
❋
14
❋
15
❋
16
❋
17
❋
18
❋
19
❋
20
❋
21
❋
22
❋
23
❋
24