STS Station User Guide xi
Number Feature Description
1 Message Indicator Indicates that you have a message.
2 24-Character
Display
Displays information about telephone status,
dialing directories, and text message information.
3Interactive Soft
Keys
Used to work in conjuction with fixed and flexible
features.
4 Flexible Button
Keys
Used to access outside lines or access call-
handling features.
5 H-T-P Used to select mode of operation: Handsfree,
Tone, or Privacy.
6 TRANS Key Used to transfer an outside call from one station to
another.
7 CONF Key Used to establish conference calls.
8 CAMP ON Used to alert a busy station that an outside line is
on hold and waiting for them.
9 MSG Key Used for Auto-CallBack to a telephone which has
left a text message or to access voice messages.
10 FWD Key Used to forward your calls to another station or
voice mail.
11 FLASH Key Used to end an outside call and to restore dial tone
without hanging up receiver.
12 MUTE Key Used to activate/deactivate MUTE function. When
activated, the party on the other end cannot hear
you.
13 SPEED Key Used to access speed dialing, save number redial
and last number redial. This button also is used to
access flex button programming.
14 Microphone Used to talk with other party without using the
handset. One of the two Executive models
includes Full Duplex capability.
15 HOLD Key Used to hold calls, to retrieve held calls.
16 ON/OFF Key Used to make a call without lifting the handset.
17 VOLUME Key Used to adjust level of tones, background music,
ringing, receiver volume, and display contrast.
18 Speaker Outputs tones and voice at your extension.
19 Headset Jack 2.5 mm Jack is located on left side of the phone.
To Next Page
Loading...
