Speed Dial 75
5. Press SPEED, then replace the handset to end speed bin
programming.
To program multiple speed numbers:
1. Press SPEED + SPEED to conclude programming a number.
2. Enter the next speed number bin to program.
If the station has no line appearance for the line
programmed into the speed bin, that line comes up under
the LOOP button or POOL button when accessed.
To erase an existing speed bin:
1. Press SPEED + SPEED.
2. Dial the speed bin location.
3. Then press SPEED again. A confirmation tone will sound.
SINGLE LINE TELEPHONE
To use speed dial:
1. Lift the handset and dial [668] on the dial pad.
2. Dial a station or system speed bin number (9000-9099).
3. Replace the handset to end the call.
To store speed dial numbers:
1. Lift the handset and dial [661] on the dial pad.
2. Dial the desired station speed number (9000-9019).
3. Dial the telephone number to store.
4. Press the FLASH button. A confirmation tone will sound.
Line Group 1 is programmed along with SLT
speed numbers, and thus Line Group 1 is
used when activating station speed dial
from an SLT.
To Next Page
Loading...
