Voltwerk VS 3, 4, 5 Operating manual 25
4 Transportation and assembly
ENGLISH
DO_BA_2008_121LB_3ENG_BVo 22.2.10
4.2.2 Wall mounting
Property damage due to incorrect storage.
LED indicators are not flush-mounted and may break under
load.
| Store inverters on their sides or rear sides only.
Requirements
| Installation instructions have been followed.
Make sure that no devices that generate warm exhaust air
are installed above or below the inverter.
A lack of clearance between the devices may reduce
output.
Required tools and materials
| String inverter (included in the delivery)
| Wall bracket (included in the delivery)
| Drilling template (included in the delivery)
|Plugs and screws (included in the delivery)
| Suitable drill
| Suitable open-ended spanner
Fitting the inverter
1. Remove the inverter from its packaging. Take care to
ensure that:
| The device hood is packed separately.
To Next Page
Loading...