Voltwerk VS 3, 4, 5 Operating manual 33
5 Installation
ENGLISH
DO_BA_2008_121LB_3ENG_BVo 22.2.10
7. Connect mains plug (4) to AC Out socket (5) on the string
inverter (see Figure 3.1, page 16, item (6)). A clicking noise
confirms a correct connection.
Result The mains power supply is connected.
Risk of injury due to electrical hazards
When commissioning, the electrical system may still present
a hazard despite careful installation and compliance with the
basic safety instructions. These hazards include:
| Direct contact with electrically live system components
| Electrostatic processes
| Short circuits and overloading
(4)
(5)
N
PE
L
To Next Page
Loading...