12
Identifying numbers
Your engine and transmission has identification plates with identification numbers. This information should al-
ways be quoted when ordering replacement parts. The appearance and location of identification plates is
shown below. The figures in brackets refer to the location of the identification numbers on the identification
plate.
Engine
Product designation (1)
Serial number (2)
Product number (3)
Certification number (4)
Drive / Shield / Reverse gear
Product designation (5)
Serial number (6)
Product number (7)
Gear ratio (8)
General information
Engine and transmission decal
xxx (5) (8) xxxxxx (7)
N
o
. xxxxxxxxxx (6)
XXXXXX (7)
XXX (5)
XXXXXXXXXX (6)
XX (8)
xxxx (1) xxxxxx (3)
N
o
. xxxxxxxxxx (2)
SX-drive/Shield
xxxxxxxxxx (4)
EMISSION APPROVED IN ACCORDANCE TO THE
BODENSEE SCHIFFAHRTS ORDNUNG ANLAGE C.
APPROVAL NO:
Reverse gear MS25/HS25
S-drive / Reverse gear MS2
Certification plate
Engine plate
To Next Page
Loading...
