66
Timing cover and drive
12
Remove the fuel injection pump pulley, operation
15A-05 and the camshaft pulley, operation 15A-06.
13
Install the crankshaft pulley if required, operation
14A-01A.
14
Install the timing belt, operation 15A-04. Remove
the fixing pin for the fuel injection pump pulley and
adjust the belt tension, operation 15A-03.
15
Remove the adjustment drifts from the camshaft
and the flywheel.
16
Check the fuel injection pump adjustment, opera-
tions 17A-03.
17
Turn the crankshaft two revolutions to ensure that
there is nothing preventing free movement
18
Install the cap of the timing cover, operation 15A-01
and install the inspection hatch.
19
Install the screw in the adjustment hole in the cam-
shaft cover.
20
Install the starter motor, operation 22B-01.
21
Connect the battery.
To Next Page
Loading...
