Service and maintenance
110 Engine
Draining
1 Place the machine in service position, see page 95.
2 Let down the front grille.
3 Detach draining hose (A) from the front grille.
4 Remove the protective cap (B) from over the draining
connection (C).
5 Connect the draining hose to the draining connection.
6 Drain the oil.
7 Disconnect the hose from the draining connection.
8 Install the protective cap over the draining connection on the oil
sump.
9 Change engine oil filter, see page 111.
Take care of filters/oils/liquids in an environmentally safe way,
see page 97.
Filling
1 Fill with oil through oil filler pipe (D).
2 Put the draining hose back in the front grille.
3 Hinge up the front grill.
Oil capacity when changing: approx. 37 litres including filters
For oil grade, see page 167.
1
74
4
D
To Next Page
Loading...
