Operating techniques
92 Hauler chassis
Hauler chassis
In general, all operating instructions in this Operator's Manual are
applicable to Hauler chassis. However, instructions related to the
dump body may not be applicable, depending on if the hauler
version is equipped with a dump body or not. Information about the
superstructure is found in the manual provided by the body builder.
Always keep these documents in the cab and replace them if they
are lost or become illegible.
Dimensions for the different versions are found on pages 198–205.
The superstructure shall be installed according to Volvo CE's
“Body builder instruction”.
1046065
Hauler chassis, versions
A25E 4x4
Standard
Standard with 1200 mm frame extension
Standard with 1700 mm frame extension
To Next Page
Loading...
