Service and maintenance
Dump body 157
Exhaust heated dump body
(optional equipment)
In order to prevent excavated material from freezing to the body,
the machine can be equipped with a flexible tube between the
tractor unit and the dump body, so that exhausts from the engine
can be used to warm up the dump body. The flexible tube is
provided with an over-load protection (A).
If the tube works loose:
1 Slacken the bolts for locking tabs (A).
2 Reposition the tube.
3 Tighten the bolts.
Maintenance of flexible exhaust tube
Clean and lubricate the marked parts (B) every 1000 hours to
make sure the function is operational in case the trailer unit might
overturn.
Lubricate the surfaces with some lubricant.
NOTE! It is important that the lubricant is allowed to dry
properly (for at least 20 minutes) before the exhaust-pipe and
the flexible exhaust tube are joined together.
It is important that the engine has the correct back pressure in the
exhaust system.
The exhaust pipe (A) must be left in place and provided with a pipe
end (B), which is provided with a restriction.
A Bolts for lock plate
B Surfaces to be cleaned and lubricated
1
47
B
A
A Exhaust pipe
B Pipe end with restriction
To Next Page
Loading...
