Service and maintenance
Lubrication and service chart 163
WARRANTY INSPECTION should be performed after the first 1000 hours according to Service Programme
Measure Page
Item
EVERY 1000 HOURS
After carrying out Daily, 50, 250 and 500 hour services
Check rubber cushions, dump body 156 6
Check brake pads, parking brake 144 7
Check steering cylinder bearings 8
Replace breather filter, fuel tank 116 2
Change primary filter, air cleaner, engine 118 3
Replace prefilter, cab 148 4
Change oil, transmission 136 5
Change oil filter, transmission 137 5
Replace breather filter, hydraulic tank 154 11
Grease propeller shaft, dropbox – frame joint 9
Lubricate ball joints, flexible exhaust tube for body heating 157 10
Clean cover, air cleaner 113 3
Clean ball joints, exhaust flexible tube for body heating 157 10
To Next Page
