VTech CareLine SN1196 User Manual

105
Answering system settings
Number of rings
You can set the answering system to answer an incoming call after
two, three, four, five or six rings; or toll saver. With toll saver selected,
the answering system answers after two rings when you have new
messages, or after four rings when there are no new messages. This
enables you to check for new messages and avoid paying long distance
charges when calling from out of your local area.
To set number of rings with a cordless
handset:
Press MENU when the handset is not in use.
Press or to scroll to Answering sys, then
press SELECT.
Press or to scroll to Ans sys setup, then
press SELECT.
Press or to scroll to # of rings, then
press SELECT.
Press or to scroll to select 6, 5, 4, 3, 2 or
Toll saver, then press SELECT. You hear a
confirmation tone.
To set number of rings with the telephone base:
Press MENU when the telephone base is not in use, then press SELECT
to select Answering system.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to # of rings, then press SELECT.
Press or to scroll to select 6, 5, 4, 3, 2 or Toll saver, then press
SAVE. You hear a confirmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
Call screening
># of rings
# OF RINGS
>4

VTech CareLine SN1196 Specifications

General

Brand	VTech
Model	CareLine SN1196
Category	Cordless Telephone
Language	English