VTech CareLine SN1196 User Manual

64
Multiple handset use
Intercom
Use the intercom feature for conversations between two system devices.
To initiate an intercom call with a cordless handset:
Press MENU, then press or to scroll to Intercom,
then press SELECT.
If you have only one handset, the handset
shows Calling BASE 0. The telephone base
rings and shows HANDSET 1 is calling.
If you have two or more handsets/pendants,
your handset shows INTERCOM TO:
Press or to scroll to the desired device and
then press SELECT. You may also enter a
destination handset number (1-9), or enter
0 for the telephone base, followed
by 0-2 for HANDSET 10 to HANDSET 12,
or followed by # for all devices.
The destination device rings. The
destination handset/telephone base
shows HANDSET X is calling/
HANDSET X is calling all.
Your handset shows Calling HANDSET X/Calling
BASE 0/Calling all pendants/Calling all devices.
To answer the intercom call on the destination
handset, press
,
or any dialing key (0-9, or
). Both handsets now show Intercom.
-OR-
To answer the intercom call at the telephone base, lift the corded
handset, or press SPEAKER or any dialing key (0-9, or ). Both
devices now show Intercom.
-OR-
To answer the intercom call on a pendant, press .
1.
•
•
2.
Answering sys
>Intercom
INTERCOM TO:
>BASE 0
Intercom
9:48
AM
5/20
9:48am 5/20
HANDSET X
is calling
MUTE

VTech CareLine SN1196 Specifications

General

Brand	VTech
Model	CareLine SN1196
Category	Cordless Telephone
Language	English